Do I need to move my flue?

A boiler flue expelling waste gasses

Building requirements are changing all the time and matters such as boiler flue regulations are regularly being updated to help ensure that households are as safe and efficient as possible. Below we outline points that we think you should know about the position of your flue.


Table of contents

  1. What is a flue?
  2. What are the boiler flue regulations?
  3. Where does the flue need to be?
  4. What if my flue has to come out onto a public walkway?
  5. Do I need to move my old boiler?
  6. Do I need to get an engineer?

What is a flue?

A boiler system’s flue is a duct or pipe that channels the waste gases safely out of the unit. This can include carbon monoxide, which is extremely dangerous, so the flue plays a vital role in your central heating system at home.

Typically, it juts out through the wall to expel the gases in a manner safe enough to avoid affecting you and your family inside your home, as well as anyone else outside.

What are the boiler flue regulations?

Due to the potentially hazardous nature of the gases handled by the flue, building regulations for boilers tend to be strict. They state that new units should be installed in precise locations in your home, to avoid putting anyone or anything at risk. (Building regulations)

Below are some examples of the regulations that might help you identify whether you need to make alterations to your home heating system in order to comply with building laws.

Where does the flue need to be?

The regulations differ for most boiler models depending on their size, but the typical guide is that the flue needs to be at least 30 cm away from an opening, such as a window, if it is to be placed above or to the side of said opening. Boilers on the larger side need to have their flues positioned up to 60 cm away from those openings.

If the flue needs to be placed below an opening, which generally means that the potential of the gases re-entering the house is greater, it must be placed at least 60 cm away.

The regulations also have requirements regarding flue positioning in relation to building corners, balconies and flat roofs must be considered; flues must be at least 60 cm away in such cases to avoid unnecessary danger. They should also be positioned well away from soil or drainpipes and eaves.

What if my flue has to come out onto a public walkway?

As more houses get built, more space runs out, which means that boiler flues sometimes have to point out onto public walkways. If this is the case with your home, the installer will be required to fit the flue at a height of 2.1 metres or higher so it is guaranteed to be above head height.

Do I need to move my old boiler?

If the flue on your old boiler appears to be in the wrong place, for example, it is lower than 2.1 metres and expels gases out onto a public right of way, you may need to get a new boiler installed.

We’re working together with BOXT, one of the largest boiler installation companies in the UK, to help you find the best boiler for your home.

BOXT makes choosing the perfect new boiler for your home easy with a fixed price quote on your screen in just 90 seconds.

It’s not always the case that you’ll need to get a new boiler, as many regulations apply only to new installations.

Do I need to get an engineer?

You should never attempt to make changes to your boiler’s setup, this should be left in the hands of a qualified Gas Safe-registered engineer. It is dangerous and costly if something goes wrong with the flue or any other part of the unit.

Information and other materials on this website are not intended to constitute professional advice and should not be relied upon. Please see our Terms of Use for further details.

 

Share this post

About the author

Brian became a fully qualified gas engineer in 2009 and has been with HomeServe since 2012 after a couple of years being self employed.

Brian was a Gas Engineer for six years at HomeServe before progressing to a Service Excellence Coach (SEC) role in 2018. The main purpose of the SEC role was the coaching and training of existing engineers as well as attending problem or complaint jobs.

Brian became a Self Fix Engineer in 2021, where he developed the Self Fix Tool guide that the call centre agents use to help our customers carry out simple user adjustments to get their boiler back up and running.

ACS, NVQ Level 3 Plumbing & Heating, IOSH, Unvented, Level 3 Team Leadership / Business Admin

Years qualified

Since 2009
Read more

Share this post

About the author

Brian became a fully qualified gas engineer in 2009 and has been with HomeServe since 2012 after a couple of years being self employed.

Brian was a Gas Engineer for six years at HomeServe before progressing to a Service Excellence Coach (SEC) role in 2018. The main purpose of the SEC role was the coaching and training of existing engineers as well as attending problem or complaint jobs.

Brian became a Self Fix Engineer in 2021, where he developed the Self Fix Tool guide that the call centre agents use to help our customers carry out simple user adjustments to get their boiler back up and running.

ACS, NVQ Level 3 Plumbing & Heating, IOSH, Unvented, Level 3 Team Leadership / Business Admin

Years qualified

Since 2009
Read more

Still looking for more help & advice?

Our help & advice articles cover Plumbing, Home heating, Electrical, Energy-saving and Home maintenance.

View all articles